TeenPower 150W Power Inverter Work with Makita 18V Battery, Battery Charger Adapter with 220V AC Outlets, Dual USB Ports, Compatible with Makita BL1830 BL1840 BL1835 BL1845 BL1850B BL1860B

£9.9
FREE Shipping

TeenPower 150W Power Inverter Work with Makita 18V Battery, Battery Charger Adapter with 220V AC Outlets, Dual USB Ports, Compatible with Makita BL1830 BL1840 BL1835 BL1845 BL1850B BL1860B

TeenPower 150W Power Inverter Work with Makita 18V Battery, Battery Charger Adapter with 220V AC Outlets, Dual USB Ports, Compatible with Makita BL1830 BL1840 BL1835 BL1845 BL1850B BL1860B

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

To start off, it’s advertised as delivering “powerful AC power for anywhere,” and features 2x 1400W AC outlets. The BAC01 is built into a Festool Systainer-compatible Makpac tool box, making it compatible with Makita’s other Makpack tool boxes and accessories. I’ve tested this device under long term load (like 200W) for 2 hours continuously – I haven’t observed any problems. It can be applied to Makita lithium batteries; 4 batteries (high to low voltage) are used in turn , and 4 batteries have a design power display.

It does not look like there’s any way to power this with Makita’s XGT 40V Max cordless power tool batteries.Full-featured outdoor travel camping can charge Android/for iPhone, DC can charge some small appliances with DC, inverter socket can be used for outdoor small refrigerators, coffee machines, small fans, laptops, razors, outdoor travel small appliances, LED lights with two gears , can be illuminated. In all honestly a 300w inverter should do the job but if someone is able to clarify this and abit of information about it that would be great. It just would be a lot more exciting if it were a powerstation compatible with 2x40v, 4x18v or the backpack… still not ALL, but at least MOST of Makita’s voltage lines. one typec (3a) one dc (12v5a) one inverter socket (110v/220V) one lamp (two gears 600 lumens 1200 lumens). That being said, hopefully the Makpac style box only has the form factor and not the durability, because makpacks can be quite flimsy.

Brands like Ridgid/AEG have integrated the battery monitor and sensor within the battery, while other brands have placed these components in the tool itself. Product photos show off the power station charging 2x XGT 40V Max batteries via a plugged-in dual port charger. Note:The battery power inverter max power is 150W, so please make sure that the power of the electrical appliances used should be less than 150W of the rated power of the inverter. I’ve checked 12V and 24V, car inverters and sadly they all have over/under voltage protection that will not work with 18V Makita (that can vary from 20V to as low as 10V). The Makita really seems like a dedicated cordless power station solution to me, as you cannot simply .Battery Compatibility- This power supply inverter only works for Makita 18V lithium batteries, such as BL1815 BL1820B BL1830 BL1830B BL1840 BL1840B BL1850 BL1850B BL1860 etc. The truth is, manufacturers use these voltage numbers as a catchy marketing strategy to grab your attention. The Makita really seems like a dedicated cordless power station solution to me, as you can’t simply swap in whatever 18V or XGT 40V Max batteries you want. Please Note: The power inverter can't be charged, the AC function should connect to extra 2-pin EU to UK plug to use the ac output. For large car batteries it’s not something terrible (my 100Ah battery has peak current over 800A) – but it could drain it real fast, and four Makita batteries in a blink of an eye.

Makita’s spec sheet mentions that, if the output is 750W or greater, the PDC01 “may stop outputting due to the battery protection function. I tried running 20 feet of 12v cable then using dc/dc inverter to 19v, failed dismally, i can however run out 40 feet of 240 cord and convert that to 19, camera and laptop are connected and limited in distance to length of usb cable, again i cant run a 40 foot usb cable. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item.Fit Well for Multiple Occassions- The portable power inverter is perfect for camping hiking outdoor adventure emergency etc. My biggest worry is running the makita charger(DC18SD), so I’m goin to be charging through the pure sine wave inverter so utilising 240v at 70w on the nameplate of the charger. I did some testing, and Makita batteries are setup in quite destructive way – over discharge protection is set around 8V. There’s no top handle, but maybe the power supply can be carried single-handedly with one of the side handles, at least until the PDC1200 is attached on top.

Obviously this makes the most sense if you have another use for the PDC1200 battery, which at this stage is targeted mainly at professional landscapers. XT90 connector – to connect battery pack to inverter, I’ve also add smaller XT60 connector, because I have quite a lot of DIY devices with that connector. As Makita does, they’ve gone about it in their typical off-beat way, but it looks like a fairly good solution.Both Constant Voltage and Constant Current trimmers when turning clockwise increase it’s limit, counter clockwise decrease it.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop